Rechargeable led bike tail lights
There are 64leds on display, so it can be seen 200 meters away.
High quality ABS material, shatter resistant.
Water resist design , so you can use it in rainy day without any worry.
4. When you riding in left, you can upward the control, the left lighting is flashing;when you riding in right, you can downward the control, the right lighting is flashing.
How to use:
1.ple install the controller on the handbar, put the light under the seat.
2 Long press host one second to switch on (all the lights flash three times), and long press host one second again to switch off (all the lights flash one time). The left red light is flashing switch on, long press 3 seconds to Match Code (host showed C), then press the any key of the remote controller to finish the setting.
2. Upward the turn light-switch to left (the left light is flashing), downward the turn light-switch to Right (the right light is flashing)
3. Short press the right button of remote control, cool graphics tall light will switch on/off (blue light flash in the middle).
4. Short press the left button of remote control, laser parallel line will switch on/off.
5. All the lights of host will lighten on when brake the bicycle.
5. When the left light of host is continuous lighting, It means low battery and need to recharge. The right light will turn on when recharging the battery, and the green light will turn on when fully charged.
Bike Turn Signals Lights, Waterproof LED Cycling Rear Tail Light For Bicycles and Cycling Safe Distance Warning Lane Lights
Lithium battery, 3.7V 650mAh
LED beads: 64 pcs